PolyPure® is a complete range of braided and knitted reinforcement tubular supports developed for the membrane industry. Once embedded into the filtration membrane fibers, it provides an overall strength up to 500N or even higher. This prevents unexpected filament breakages that causes consequently wastewater being sucked into the filtrate, securing an optimal function of the overall filtration system.
PolyPure® is a complete range of braided and knitted reinforcement tubular supports developed for the membrane industry. Once embedded into the filtration membrane fibers, it provides an overall strength up to 500N or even higher. This prevents unexpected filament breakages that causes consequently wastewater being sucked into the filtrate, securing an optimal function of the overall filtration system.
Knitted fiberglass tape is a thin textile gasket designed for high temperature applications. The fiberglass tape is used with oven door stove door or grilling closure. It is produced with air texturized fiberglass filaments. It is specially designed for installations where glass panels are installed with steel frames. In normal working conditions as the steel frame expands due to dilatation in high temperature areas, this type of tape acts as a flexible separation layer between steel frames and glass panels.
It is a highly resilent textile gasket designed for high temperature applications. The outer surface is composed of multiple intertwined fiber glass yarns that form a rounded tube. To improve the resiliency of the gasket, a special supporting tube made of stainless steel wire is inserted inside the inner cores. This allows a superior life cycle while keeping constant spring effects.
SPANDOFLEX PET022 is a protective sleeve made of polyethylene terephthalate (PET) monofilament with a diameter of 0.22mm. It can be expanded to a maximum usable diameter at least 50% higher than its normal size. Therefore, each size can fit to different applications.
RG-WR-GB-SA is a resilient texitile gasket designed for high temperature applications. It’s composed of multiple intertwined fiberglass yarns that form a rounded tube.
To further facilitate the installation onto the frame, a self adhesive tape is available.
Aluminum foil laminated fiberglass fabrics are made of fiberglass fabrics laminated an aluminum foil or film on one side. It can resistant radiant heat, and has a smooth surface, high strength, good luminous reflectance, sealing insulation, gas-proof and water proof.
It is a highly resilent textile gasket designed for high temperature applications. The outer surface is composed of multiple intertwined fiber glass yarns that form a rounded tube. To improve the resiliency of the gasket, a special supporting tube made of stainless steel wire is inserted inside one of the inner cores, another inner core is a braided cord which also offers a strong support to the gasket. This allows a superior life cycle while keeping constant spring effects.
Spanflex PET025 is a protective sleeve made of polyethylene terephthalate (PET) monofilament with a diameter of 0.25mm.
It is lightweight and flexible construction specially designed for the protection of pipes and wire harness against unexpected mechanical damages. The sleeve has furthermore an open weave structure which permits drainage and prevents condensation.
GLASFLEX UT is a braided sleeve using continuous fiberglass filaments that is able to withstand high temperature in continuous up to 550 ℃. It has excellent insulation capabilities and represents an economic solution to protect pipes, hoses and cables from molten splashes.
Thermo gasket is a highly resilient textile gasket designed for high tempereture applications. The outer surface is composed of multitwined fiber glass yearn that found a rounded tube.To improve the resiliency of the gasket a special supporting tube made of stainless steel wire is inserted inside the tube. Stainless steel clips are used to fix the gasket to the applications firmly.